Removing The Wheels
- With assistance, forklift or other safe working method, lift the remaining dolly assembly onto a raised platform so that the centre is supported and the wheels are clear of obstacles underneath.
- Note: as long as you do not remove/adjust any chains or undo the wheel casting lock nut the dolly will not need to be re-tracked (assuming that it was tracked to begin with).
- It is best to have the legs in narrow mode as pictured, if you are going to put the dolly on stage boxes to drain the oil next.
- The wheel assembly is retained in place by a single bolt through the wheel hub at the end of each arm.
- Support each wheel before loosening.
- As you undo each bolt support the weight of the wheel until the bolt is completely undone, before completely removing the wheel assembly.
- The bolt is retained and may be removed by unscrewing it theough the central geared hub.
